top of page

Standard Fireplace Resorations

Sometimes, inserts or full replacements are not necessary to get your fireplace back to a safe working condition. Based on a Level 2 inspection, we can determine if only need a reline and a chamber parge, and/or a new firebox or firebox repair. 

Relining a flue

We can correct a number of issues in a chimney by relining a flue. Improper flue sizing, poor draft, deteriorated flue tiles, poor clearance to combustibles, and more can be remediated by installing a insulated liner. If you have terracotta flue tiles, our inspection will help determine if the flue tiles need to be removed before a new liner installation. We can also determine whether you've had an improper liner installation in the past, remove it and replace it.

Parging a Chamber
Repairing a Firebox

Chambers are often constructed poorly, with ledges and corners that cause unwanted turbulence. This leads to quicker build up and causes safety concerns. Chamber-Tech 2000 is used to reform a chamber, eliminating the ledges and corners often present when chambers are build with brick. This improves draft, vastly reduced turbulence and improves draft.

Deteriorating fireboxes are caused by many factors, but can be repaired very easily. From spot repairs to full rip out and replacements, repairing the firebox can improve the performance and provide a nicer look to a main focal point of your fireplace. The firebox should be constructed with firebrick, and our newly constructed, full fireboxes are back filled with a fireproof granule poured insulation. 
this helps absorb and reflect heat as well as provide extra protection behind and to the sides or your fireplace.

bottom of page